GIRAFFONA - Heavy Duty Offset Flail Mower 120-200hp

Introduction

Giraffona - Heavy Duty Offset Flail Mower 120-200hp

The Giraffona Flail Mower is the heavy duty offset model, designed for medium sized agricultural tractors from 120 to 200hp and is typically used for amenity and agricultural applications.

The Giraffona Flail Mower is suitable for cutting grass, road side & hedgerow maintenance and shredding branches or twigs.

Main Features

  • Cat II/III
  • Hydraulic Horizontal offset and tilt
  • 6 Spline PTO
  • Single Speed 540 rpm Gearbox With Freewheel
  • Transmission Belts With External Adjustment
  • Hammer Flails
  • Toothed Lower Counter Blade
  • Steel Front Safety Flaps
  • Height Adjustable Rear Roller
  • Pair Of Side Skids
  • Break Back Protection
  • Left & Right hand offset models

Features

Shock Protection

The Obstruction Safety Device on the Giraffona Offset Flail Mower protects the machine from damage when hitting immoveable objects during work, by utilising a three spring absorption unit that compresses and allows the Flail Mower to retract and move around the obstacle then return back to its set working position. A steel front buffer bar protects both the machine and obstacle during collisions.

PTO Gearbox

The Giraffona uses an externally mounted self contained gearbox with an input speed of 540rpm.

 

 

 

Linkage Mounting

The Giraffona uses a category II or III three point hitches to connect to the tractor depending on the size of the model.

Transmission Belt

The Giraffona Flail Mower utilises 5 toothed transmission drive belts to transfer power to the rotor, the toothed drive belts allow slip proof engagement preventing power from the transmission being reduced due to heavy loads or general wear.

  

 

Blades & Hammer Kits

The Giraffona Flail Mower comes standard with hammer flails and as an option with fish tail flails, the self sharpening hammer flail leaves a clean and level cut and lifts and mulches while cutting. The fish tail flail is used for cutting dense tougher material. The hammers and blades bolt onto the rotor which is electronically balanced to minimise machine vibration and stresses on the bearings.

Fish Tail FlailHammer Tail Flail

Counter Blade

The Giraffona Offset Flail Mower comes as standard with double counter blades, an internal lower toothed counter blade and one upper counter blade that ensure that the discharged material is mulched into fine pieces. Upper counter blades enable the Giraffona to produce a finer mulch of harder coarser materials.

Adjustable Rear Roller

The internal position unloads the material behind the roller and is recommended for grass cutting. As a rule the roller scraper isn't required for the internal position as the spinning flails on the machine automatically carry out this process.

Protective Front Safety Flaps

Steel front safety flaps allow material to enter the cutting chamber but prevent pieces from being thrown out at high speed.

  

Hydraulic Offset

The Giraffona Flail Mower comes as standard with hydraulically adjustable side and incline offset. It utilises a hydraulic system to allow the machine to work either directly behind the tractor or to the side enabling the user to reach far beyond the tractor and the ability to work on vertical or steep sloping surfaces. Comes in both left or right hand models.

Pair of Side Skids

A pair of hard wearing protective skids prevent wear to the machine and allow the operator to adjust the cutting length.

Floating Head System

The flail head on the Giraffona is fully floating allowing it to follow the contours of the ground.

     

Long Life Bearings

The Giraffona Flail Mower uses barrel roller bearings, each bearing has a double rail consisting of two rows of spherical or barrel bearings to cope with heavy workloads. All bearings used in Maschio Flail Mowers are produced by SKF.

Main Advantages:

Long Life (Up to 30% longer life than traditional taper roller bearings) 

High Load Capacity (shock resistance) 

Easy Maintenance (One of Maschio's main philosophies)

Model

Model

Models

Giraffona - Heavy Duty Offset - Standard Equipment

210

Three point hitch Cat. II-III

Gearbox PTO 540rpm with PTO and free-wheel

Transmission belts with external adjustment 

Front safety flaps

Hydraulic system for side or inclined offset

Double toothed counter-blade

Pair of skids

Elector balanced rotor

Double skin frame

Hammer kit “14”

Front Buffer Bar 

Shock protection system

Adjustable rear roller 

Shredder head floating system 

«CE» safety guards

Left or Right hand models

230

260

Technical Information

Technical Information

Models

Cutting Side

HP

Working Width m

Total Width m

No. of Hammers

Weight kg

PTO/RPM

210

Left

120-200

2.1

2.64

16

1045

540

230

Left

130-200

2.26

2.78

20

1080

540

260

Left

140-200

2.57

3.08

20

1186

540

210

Right

120-200

2.1

2.64

16

1045

540

230

Right

130-200

2.26

2.78

20

1080

540

260

Right

140-200

2.57

3.08

20

1186

540

Models

A

C

D

cm

cm

cm

cm

cm

210

210

238

50

318

200

230

226

238

50

334

216

260

257

238

50

365

247

Pricing

Maschio Gaspardo January 2017 Price List

To download the MASCHIO GASPARDO product price list click the image above

To download and view our Product Price List you will need the free Adobe Reader
If you don't already have this Click Here to download the Adobe Reader

Downloads

Special Offers

Gallery

Would you like some more information?