CAMILLA Hedge Cutter 4.5m - 6.0m 60hp+

Introduction

CAMILLA Hedge Cutter 4.75m - 6.1m 60hp+

The New Maschio CAMILLA range of Hedge Cutters are suitable for semi professional users looking to deal with annual hedge growth and grass maintenance. Suitable for tractors from 2300kg and 60 horsepower upwards.

 

  • Parallel Arm
  • Dual Direction Rotor – Safety Lock
  • Balanced Helical Rotor
  • Dual Breakback Safety System
  • Heavy Duty Bushings
  • CFS (Contour Following System)
  • Large Cutting Head Angle (246 degrees)
  • Cutting Head Saftey Valve
  • High Oil Tank Reserve
  • Hydraulic Slew
  • 600T Model – Telescopic head arm
  • Parking Stands
  • Cutting Head Side Skid
  • Lever Cable Controls - Standard
  • Twin Gear Pumps
  • Filters
  • CatII Linkage

Features

Parallel arm

Maintains level of cutting head as it is extended ensuring a level and straight cut at all times.

Dual directional rotor

It is possible to reverse the direction of the rotor: this makes the machine suitable for cutting all types of hedges and grass. To prevent accidental reversal, the lever for this function has a safety lock.

Balanced helical rotor

Every rotor is made from 8mm extruded steel, balanced in the factory and has helically mounted flails to ensure zero vibration and retain balance after heavy usage.

Dual break-back safety system

If obstructions are encountered, a double safety system prevents damage. The first system is a Nitrogen dampener which allows a small amount of break back and resets automatically. If this system is not sufficient to provide protection then the second mechanical shock absorber allows the arm to break back 90°.

Heavy duty bushings

As with all Maschio machines built in the Maschio way.

CFS (Contour Following System)

All Maschio hedge cutter models are equipped with CFS (Contour Following System). Once the hedge cutter is set at the desired position, the CFS uses an “over centre” valve in the ram controlling the first arm, this means that the oil in the top part of the cylinder (the lift) can return to the tank if excessive pressure is put on it e.g. when the head rises up to follow the contours of the ground within limits without using the joystick. The hedge cutters arm and head automatically adapts to ground contours following the bumps.

In case the hedge cutter runs into a steep ground level drop, the arm will stop -20 cm from the start position that was previously set preventing the head from falling down and the tractor from overturning.

Large cutting head angle (246 degrees)

The cutting head has working angle rotation of 246° for deep bank cutting and under branch cutting.

Cutting head safety valve

A pressure drop valve on the head rotor motor prevents damage to the hedge cutters if the rotor should get jammed.

High oil tank reserve

This keeps the oil cool in long working periods.

Hydraulic slew

The Hydraulic “Slew” on the CAMILLA hedge cutter allows the main arm to rotate 92° from its standard working position, this gives a compact transport position and also allows the hedge cutter the ability to cut behind the tractor.

 

The 600T CAMILLA model has a telescopic arm giving more reach.

Parking stands

Adjustable parking stands enable the unit to be picked up and detached from the tractor safely and with ease.

Cutting head side skid

The Cutting Head Side Skid mounted to the outer side of the cutting head prevents damage to the machine and vegetation whilst working in a vertical or side position.

Twin gear pumps

Two side by side pumps rather than 2 in line pumps provide more power to each function and improve reliability by reducing the stress on one shaft.

Dual filters

Maschio fit two filters as standard, one at the tank and one before the valve block. On the piston pump there is an additional 3rd filter before the pump.

Controls

Lever Cable Controls – Standard

Cable lever controls come as standard with a safety lever that prevents the rotor from accidentally being put in reverse spin direction.

Joystick Controls - Optional

Simplicity and programmability – The current Joystick is fully programmable and allows progressive activation of each function with sensitivity being adjusted by reprogramming with a laptop but the new version currently in test will be more ergonomic and allow simpler reprogramming to suit each customer.

Water resistant – IP68 standard of water resistance.

Service exchange – the brain of the joystick is in the joystick so it can be exchanged easily if there is a problem. Maschio offer a service exchange.

Oil cooler required.

Models

CAMILLA Hedge Cutter 4.5m - 6.0m 60hp+

Models

Reach

Cutting 

Weight 

Min. Tractor Weight (kg)

HP

Hyd Oil

Rotor (rpm)

Rotor Ø

Hyd Motor 

Height (m)

Head (m)

(kg)

(lt.)

(mm)

(Max. HP)

450

4.75

1.3

940

2300

60

170

3000

430

40

500

5

1.3

960

2300

60

170

3000

430

40

550

5.3

1.3

1060

3000

70

200

3000

430

48

600 T

6.1

1.3

1240

3500

80

200

3000

430

48

Technical Specification

CAMILLA Hedge Cutter 4.5m - 6m 60hp+

Models

A

B

C

D

E

F

F1

F2

G

H

I

L

M

N

O

P

Q

R

S

(m)

(m)

(m)

(m)

(m)

(m)

(m)

(m)

(m)

(m)

(m)

(m)

(m)

(m)

(m)

(m)

(kg)

(°)

(°)

450

4.8

1.3

2

4.4

5.6

1.5

1.6

1.5

1.9

-

3

4.6

1.1

2.5

2.2

1.2

940

246

92

500

5

1.3

2.1

4.9

6

1.6

1.6

1.6

2.1

-

3.3

5.1

1.1

2.6

2.3

1.2

960

246

92

550

5.3

1.3

2.1

4.9

6

1.6

1.6

1.6

2.1

-

3.3

5.1

1.1

2.6

2.3

1.2

1060

246

92

600 T

6.1

1.3

2.1

5.3

6.6

2.8

1.8

1.5

2.8

0.8

4.3

6

1.1

3.1

2.5

1.2

1240

246

92

 

A

Horizontal reach (max)

I

Downward reach (max)

B

Cutting head width

L

Upward reach (max)

C

Distance from tractor when ground cutting (min)

M

Width from tractor centre of non-cutting side

D

Hedge-top cutting height (max)

N

Transport width

E

Vertical reach height (max)

O

Transport height

F

Vertical height reach distance from centre of the tractor (max)

P

Transport depth

F1

Distance from tractor when lower vertical cutting (min)

Q

Weight

F2

2nd/3rd vertical cutting pass distance from tractor (min)

R

Cutting head angle

G

Hedge-top cutting reach (max)

S

Slew angle

H

Arm Extension (max)

 

 

Options & Accessories

CAMILLA Hedge Cutter 4.5m - 6m 60hp+

OPTIONAL EXTRAS

Model No.

Description

24EGL95080

Oil Cooler

24EGL95315

Blower

24EGL95059+

Upgrade to head with belts and piston pump

24EGL95057

Proportional Electric Joystick (450, 500 & 550)

24EGL95058

Proportional Electric Joystick (600T)

 

Pricing

Maschio Gaspardo January 2017 Price List

To download the MASCHIO GASPARDO product price list click the image above

To download and view our Product Price List you will need the free Adobe Reader
If you don't already have this Click Here to download the Adobe Reader

Downloads

Gallery

Would you like some more information?