ORSO Rapido Plus Power Harrow 120-300hp

Introduction

ORSO Rapido Plus Power Harrow 120-300hp

The ORSO Rapido is the top rigid model in the Maschio Power Harrow range. Not only does the Orso model have quick fit tines and stone protectors as standard it has been designed for the most arduous conditions. Furthermore the Orso model comes as standard as a “combi” version which means it is prepared to be coupled with Maschio drills.

 

This power harrow suits tractors ranging from 120-300hp.

The ORSO RAPIDO PLUS has also been tested to the extreme from running the rotors continuously in a mud bath to check the sealing system, to heavy shock testing by running the machine in quarry whilst carrying additional weight.

When designing the Orso model Maschio introduced a new style double rail barrel bearing that gives high load capacity and up to 30% extended life compared to traditional taper roller bearings.

Thetine system and therotor and gear shield system, come as standard on the ORSO RAPIDO PLUS.

 

Main Features:

  • Cat II
  • 21 Spline PTO Shaft With Cam Clutch
  • Gearbox Speed 1000 rpm
    (Using 16-22 gears) Giving 350 rpm Rotor Speed
  • Pin Adjustment For Rear Roller
  • Long Dampened Side Deflectors
  • Rear Levelling Bar With Mechanical Adjustment
  • Rear PTO
  • Rapido Quick Fit Tines
  • Stone Deflectors
  • Combination Version As Standard

Features

Gearbox

The ORSO Power Harrow utilises a high power multi-speed gearbox with hardened tempered gears and is capable of transmitting up to 250 hp (186KW). The ORSO comes as standard with an extra set of gears allowing the operator to alter the ratio and choose from either 350 rpm (standard: 16-22 gear set).

 

The gearbox also has a spline at either end so the ORSO Power Harrow can be used as either a rear or front mounted machine. Another PTO driven machine can be mounted and used behind this Power Harrow.

PTO shaft

The ORSO comes as standard with a cam PTO shaft (1" 3/8 21 spline tractor side).

Linkage mounting

Cat II three point swinging hitches allow the machine to be connected to the tractor with ease and prevent heavy stresses being applied to the power harrow and tractor when working on undulating ground as the swinging hitches allow the machine to float whist still being securely attached to the tractor.

Depth control

The ORSO RAPIDO PLUS utilises a simple pin system to control the depth as standard. Hydraulic depth control is available as an option.

Number of rotors

25cm spacing between the rotors give Maschio Power Harrows more rotors than many other power harrows on the market today, it also lowers the horsepower requirement and most importantly leaves a finer tilth.

Timing of rotors

The tine rotors are all positioned at different angles which allow the power harrow to gradually dig into the soil reducing the vibration transmitted to the tractor and reducing peak loads on the driveline resulting in smoother operation and less fuel consumption.

Double skin trough

The image above shows the strength that is built into the Maschio power harrow transmission trough. It has been put through rigorous testing with extreme loads to ensure it’s one of the strongest on the market.    

The ORSO RAPIDO PLUS Power Harrow comes with the double skin transmission trough consisting of an inner 6mm steel trough and a 5mm outer skin, resulting in 11mm thickness in total.

The outer skin prevents stones and other objects damaging the inner skin and also gives a huge amount of strength to the main trough which needs to cope with the power that is transmitted through the drive line and all the stresses and vibrations during work.

Side dampeners

The extra long side guards prevent soil spilling from the side of the power harrow and leaving ridges and lines during work. The guards have built in spring dampeners that absorb the collisions from large stones preventing damage.

 

QUICKFIT tines

The ORSO RAPIDO PLUS Power Harrow uses the QUICKFIT tine system which allows the user to replace rotor tines quickly with one turn of the QUICKFIT tool, this minimises downtime and increases safety.

 

The ON-GRIP tines are ideal for working in hard uncultivated soils with crop residues. Due to the shape of the blades you get excellent mixing of soil, it also leaves a large proportion of the large course soil on the surface preventing the top layer of soil creating a water tight crust.

The ON-GRIP tines can also be reversed to ON-SLIDE to work more like a standard power harrow blade producing a finer tilth on the surface if required.

QUICKPLUS stone deflectors

QUICKPLUS is a bolt on shield system which fits just in-front of the rotor as it comes out of the transmission trough, preventing stones and debris colliding with the rotor and gearbox, in turn this helps to push the stones down to the lower cultivated area.

Rear rollers

The POWER HARROW rollers adapt the machines for different types of soil and different requirements of seed bed preparation. Five types are available on the ORSO Rapido Plus - cage roller, packer roller, rubber roller, guttler roller and combi packer.

Cage Roller - Ø450mm

Works well on medium soil types and in low moisture conditions creating a good seed bed.

Packer Roller - Ø500mm & Ø600mm

The toothed Packer Roller works well breaking up any surface clods further and at the same leaving an excellent finish, ready for seeding. This roller also comes standard with tungsten coated scrapers.

Rubber Roller - Ø600mm

 

The rubber roller is designed for use along with a combination seed drill. Its concentrated consolidation improves the uniformity of the seedbed guaranteeing a much more consistent seed depth.

Guttler Roller - Ø450mm

The acrylic/special cast Guttler roller is the ideal solution for reducing weight and yet still aggressively cultivating the soil. It also concentrates consolidation in line with drill coulters and stays clean in tacky conditions.

Combi Packer - Ø500mm

The Combi Packer is designed to consolidate the soil in line with the seeding coulters to achieve a constant seeding depth for a more uniform plant emergence. Outer lugs on the roller give a driving action on high residues or soil that can stall rollers.

Rear Roller Bearings

Strength is designed in to the build of each type of roller and the end bearings are protected by their casings whilst grease nipples are positioned out of harm's way.

Levelling Bar

The levelling bars on all models are mounted on the rear roller, this ensures that the levelling bar does not have to be altered every time the power harrow is adjusted for depth. The adjustment of the levelling bar allows the operator to ensure an even 'bed' of soil is presented to the rear roller for consolidation giving a consistent finish behind the power harrow. The levelling bar can also be used to keep soil, particularly clods, in the rotor area so that it is broken down to a finer particle size before passing underneath the bar and roller.

Tungsten Scrapers

Adjustable 'Long Life' Tungsten scrapers are fitted to all packer rollers and rubber rollers, they are positioned low, close to the soil at the rear of the roller ensuring soil does not build up into large clumps before being cleaned off.

QUICK-MATCH

The QUICK-MATCH system allows quick and easy attachment of the Maschio Power Harrow to the seed drill using a 3 point linkage, the drill and power harrow combination can be detached quickly and safely to use the harrow alone.

 

The QUICK-MATCH system uses plastic buffer rollers to fix the drill to the power harrow and transfer the weight of the drill to the power harrow roller only, preventing damage to the machine on rough and stony ground.

With the drill locked into position on the power harrows roller, the harrow and drill can float independently ensuring the drill seeds at a constant depth even on very uneven land.

Tines and blades

All Maschio tines are produced in Italy by Maschio and are made from high quality Boron tempered steel to provide reliability during work and long lasting performance. They are made on a robotic production line to guarantee that from the first to the last they are all of the finest quality.

 

To assure you of the quality of the Maschio tines, Maschio guarantee the tines for their life…. “So if you break one we replace it!” all completely free of charge.

Point options include:

Standard QUICKFIT tines

Slide “ON GRIP – ON SLIDE” tines, ideal for working in hard or un-cultivated soil when used on grip.

Standard QUICKFIT tungsten coated tines

Rotor Design

Pressed spline

The rotor splines are pressed into the shaft not machined, resulting in much stronger teeth and a more robust rotor shaft capable of transmitting higher torque.

Hardened rotor

The Rotor shaft is made from 42 CrMo 4, hardened and tempered at 300 HB

Which can increase its life by up to 62%

55mm rotor

The 55mm rotor shaft gives added strength to the drive-line ensuring years of hassle free operation.

Labyrinth seal

The ORSO Power Harrow uses a Cassette Seal below the top bearing sealing in a large quantity of grease allowing the top bearing to be maintenance free. The Cassette Seals are approximately ten times more resistant to dirt than standard sealing systems.

Maschio Power Harrows feature ‘heavy duty’ Labyrinth seals that prevent water and soil penetrating the rotor and gearbox and also prevent oil escaping even after many seasons of use.

The Labyrinth seal is specially designed for Maschio Power Harrows and is made from cellular polyurethane, this is the best material to guarantee a perfect seal and also provides excellent durability thanks to its wear and age resistance.

Stress distribution

The Maschio rotor system has a long shaft and reinforced bearings that are spaced as far apart as possible to cope with the twisting force and torque applied to the rotor.

Hardened gears

Hardened gears submerged in oil transfer the power from the drive-line to the rotor tines.

Easy access bearings

Each rotor has a separate cover which allows the bearings to be checked or changed without the need of completely removing the whole transmission trough cover.

Bearings

The ORSO RAPIDO PLUS Power Harrow uses barrel roller bearings, each bearing has a double rail consisting of two rows of spherical or barrel bearings to cope with heavy workloads.

Main Advantages:

Long Life (Up to 30% longer life than traditional taper roller bearings)

High Load Capacity (Multi axial shock resistance)

Easy Maintenance (One of Maschio's main philosophies)

Oil dipstick

The integrated dipstick with built in breather allows oil levels to be checked and controlled easily.

Models

ORSO Rapido Plus Power Harrow 120-250hp

Models

Orso Rapido Plus - Standard Equipment

3000

1000rpm input gearbox

Standard gear: 16-22

Rotor revolutions: 350

Circular blade carrier shaft

Quick Fit blades with replaceable bolt on blade carrier

Double wall reinforced gear box casing 

Universal 3 point cat II hitch

Front speed lift bar attachment (combi)

Tractor side 1 3/8" 21 spline

Rear roller with pin depth adjustment 

Rear PTO output

Rear levelling bar with mechanical adjustment 

2 blades per rotor 

Sprung side guards (combi)

Stone deflectors

«CE» safety guards

3500

4000

Technical Specification

ORSO Rapido Plus Power Harrow 120-250hp

Orso Rapido Plus Power Harrow with Ø450mm Cage Roller

Models

HP

Working Width m

Total Width m

Machine Centre

No. of Tines

Working Depth cm

Weight kg

Shaft Diameter mm

PTO/RPM

cm <--> cm

3000

120-300

3

3.05

150<-->150

24

28

1485

55

1000-350

3500

130-300

3.5

3.55

175<-->175

28

28

1630

55

1000-350

4000

140-300

4

4.05

200<-->200

32

28

1765

55

1000-350

                   

Orso Rapido Plus Power Harrow with Ø500mm Packer Roller

Models

HP

Working Width m

Total Width m

Machine Centre

No. of Tines

Working Depth cm

Weight kg

Shaft Diameter mm

PTO/RPM

cm <--> cm

3000

120-300

3

3.05

150<-->150

24

28

1660

55

1000-350

3500

130-300

3.5

3.55

175<-->175

28

28

1830

55

1000-350

4000

140-300

4

4.05

200<-->200

32

28

2030

55

1000-350

                   

Orso Rapido Plus Power Harrow with Ø600mm Packer Roller

Models

HP

Working Width m

Total Width m

Machine Centre

No. of Tines

Working Depth cm

Weight kg

Shaft Diameter mm

PTO/RPM

cm <--> cm

3000

120-300

3

3.05

150<-->150

24

28

1770

55

1000-350

3500

130-300

3.5

3.55

175<-->175

28

28

1975

55

1000-350

4000

140-300

4

4.05

200<-->200

32

28

2150

55

1000-350

                   

Orso Rapido Plus Power Harrow with Ø600mm Rubber Roller

Models

HP

Working Width m

Total Width m

Machine Centre

No. of Tines

Working Depth cm

Weight kg

Shaft Diameter mm

PTO/RPM

cm <--> cm

3000

120-300

3

3.05

150<-->150

24

28

1820

55

1000-350

3500

130-300

3.5

3.55

175<-->175

28

28

2025

55

1000-350

4000

140-300

4

4.05

200<-->200

32

28

2230

55

1000-350

                   

Orso Rapido Plus Power Harrow with Ø450mm Guttler Roller

Models

HP

Working Width m

Total Width m

Machine Centre

No. of Tines

Working Depth cm

Weight kg

Shaft Diameter mm

PTO/RPM

cm <--> cm

3000

120-300

3

3.05

150<-->150

24

28

1548

55

1000-350

3500

130-300

3.5

3.55

175<-->175

28

28

1693

55

1000-350

4000

140-300

4

4.05

200<-->200

32

28

1867

55

1000-350

Orso Rapido Plus Power Harrow with Ø500mm-125 Combi Packer

Models

HP

Working Width m

Total Width m

Machine Centre

No. of Tines

Working Depth cm

Weight kg

Shaft Diameter mm

PTO/RPM

cm <--> cm

3000

120-300

3

3.05

150<-->150

24

28

1785

55

1000-350

4000

140-300

4

4.05

200<-->200

32

28

2247

55

1000-350

Orso Rapido Plus Power Harrow with Ø500mm-150 Combi Packer

Models

HP

Working Width m

Total Width m

Machine Centre

No. of Tines

Working Depth cm

Weight kg

Shaft Diameter mm

PTO/RPM

cm <--> cm

3000

120-300

3

3.05

150<-->150

24

28

1737

55

1000-350

4000

140-300

4

4.05

200<-->200

32

28

2196

55

1000-350

Orso Rapido Plus Power Harrow with No Rear Roller

Models

HP

Working Width m

Total Width m

Machine Centre

No. of Tines

Working Depth cm

Weight kg

Shaft Diameter mm

PTO/RPM

cm <--> cm

3000

120-300

3

3.05

150<-->150

24

28

1293

55

540 / 193-353 1000-357

3500

130-300

3.5

3.55

175<-->175

28

28

1403

55

540 / 193-353 1000-357

4000

140-300

4

4.05

200<-->200

32

28

1547

55

540 / 193-353 1000-357

Options & Accessories

Options & Accessories

Orso Rapido Plus Power Harrow - OPTIONAL EXTRAS

Model No.

Description

11M95500860

Pair of gears for 300 rmp (15-24)

11M95500223

Pair of gears for 395 rmp (15-24)

11M95500238

Hydraulic up and over seed drill hitch kit

11M99500257

Front Mount Kit

11M95512415

Pair of track erradicators with pin adjustment and safety shear bolt

11M99512416

Pair of track erradicators with pin adjustment and safety spring reset

Pricing

Maschio Gaspardo January 2017 Price List

To download the MASCHIO GASPARDO product price list click the image above

To download and view our Product Price List you will need the free Adobe Reader
If you don't already have this Click Here to download the Adobe Reader

Downloads

Gallery

Would you like some more information?