C Type Rotary Cultivator 60-130hp

Introduction

C Type Rotary Cultivator 60-130hp

“C” Type Maschio Rotary Cultivators are designed for use on small to medium sized agricultural tractors from 60 to 130hp and are typically used for horticultural and agricultural work.

Main features:

  • Cat II
  • 6 Spline PTO Shaft With Slip Clutch
  • 540 rpm Gearbox gives 143, 175, 214 & 262 rpm rotor speeds
  • 1000 rpm Gearbox gives 324 & 356 rpm rotor speeds
  • Side Gear Drive Immersed In Oil
  • 6 blades Per Flange
  • Bonnet Spring Adjusters
  • Skids, Cage Roller Or Packer Roller for Depth Control

Features

Gearbox

Multi speed PTO gearbox running at 540/1000 rpm. At 540rpm 4 speed settings give a choice of 175, 214, 262 & 143 rotor rpm, at 1000 PTO rpm two speed settings of 324 & 356 are achivable.

PTO shaft

PTO shaft with slip clutch protection, 1” 3/8, 6 spline tractor side yoke.

Side chain drive

Heavy duty gear drive running in a sealed oil bath to give constant lubrication during work.

Linkage mounting

Universal CAT II three point swinging hitches allow the machine to follow the contours on undulating ground.

 

CE safety guards

CE Safety guards as standard.

Anti roll over

To prevent the rotary cultivator from rolling over when the machine is being detaching from the tractor, the safety pin can be placed in the locked position on the pressure rod which is connected to the rear levelling bonnet.

Duo-Cone & O-Ring sealing system

The new Duo-cone sealing system guarantees reliability without the need for maintenance.  You can achieve at least 50% longer life from the Duo-cone system when compared standard systems in the most demanding working environments.

The sealing system is completely waterproof or “amphibious” allowing the rotor and bearing to run in its own oil supply, this allows the rotor to work and be reliable in the most dustiest environments or even work immersed in water and yet the seals will still prevent water and dust ingress into the rotor and hubs.

The rotor is supported by oversized SKF roller bearings.

Levelling bonnet

The levelling bonnet comes as standard complete with a sprung mechanical rod that puts constant downward pressure on the bonnet and acts as a shock absorber protecting the bonnet from damage, whist working in stony conditions.

Blades

The C type Rotary Cultivator has 6 blades per flange ensuring a fine tilth is produced.

Adjustable side skids

A protective skid on either side of the machine controls the working depth and protects the main transmission cover from wear.

Rear rollers

The ROTARY CULITVATOR rollers adapt the machines for different types of soil and different requirements of seed bed preparation. Two types are available on the C TYPE - cage roller and packer roller.

Cage Roller - Ø450mm

Works well on medium soil types and in low moisture conditions creating a good seed bed.

Packer Roller - Ø450mm 

The toothed Packer Roller works well breaking up any surface clods further and at the same leaving an excellent finish, ready for seeding. This roller also comes standard with tungsten coated scrapers.

 

Rear Roller Bearings

Strength is designed in to the build of each type of roller and the end bearings are protected by their casings whilst grease nipples are positioned out of harm's way.

 

Tungsten Scrapers

Adjustable 'Long Life' Tungsten scrapers are fitted to all packer rollers and rubber rollers, they are positioned low, close to the soil at the rear of the roller ensuring soil does not build up into large clumps before being cleaned off.

Models

C Type Rotary Cultivator 60-130hp

Models

C Type - Standard Equipment

205

Gearbox with 540/1000 rpm PTO

540 PTO rotor revolution (rpm): 175-214-262-143

1000 PTO rotor revolution (rpm): 324-356

PTO shaft with slip clutch (1" 3/8 6 spline tractor side yoke)

Side gear drive in oil bath

Universal three point hitch cat. II

Bonnet spring adjusters 

6 blades per flange (side blades are always mounted outwards)

«CE» safety guards

230

250

280

300

Technical Information

C Type Rotary Cultivator 60-130hp

C Type Rotary Cultivator with Side Skids

Models

HP

Working Width m

Total Width m

Machine Centre 

No. of Blades

Working Depth cm

Weight kg

Side Drive

PTO/RPM

cm <--> cm

205

60-130

2.1

2.23

105<-->105

48

27

686

Gears

540/175-214-262-143

1000/324-356

230

70-130

2.35

2.48

117.5<-->117.5

54

27

778

Gears

540/175-214-262-143

1000/324-356

250

80-130

2.6

2.73

130<-->130

60

27

829

Gears

540/175-214-262-143

1000/324-356

280

85-130

2.85

2.98

142.5<-->142.5

66

27

885

Gears

540/175-214-262-143

1000/324-356

300

100-130

3.1

3.23

155<-->155

72

27

940

Gears

540/175-214-262-143

1000/324-356

                   

C Type Rotary Cultivator with Ø450mm Cage Roller

Models

HP

Working Width m

Total Width m

Machine Centre 

No. of Blades

Working Depth cm

Weight kg

Side Drive

PTO/RPM

cm <--> cm

205

60-130

2.1

2.23

105<-->105

48

27

879

Gears

540/175-214-262-143

1000/324-356

230

70-130

2.35

2.48

117.5<-->117.5

54

27

993

Gears

540/175-214-262-143

1000/324-356

250

80-130

2.6

2.73

130<-->130

60

27

1075

Gears

540/175-214-262-143

1000/324-356

280

85-130

2.85

2.98

142.5<-->142.5

66

27

1152

Gears

540/175-214-262-143

1000/324-356

300

100-130

3.1

3.23

155<-->155

72

27

1211

Gears

540/175-214-262-143

1000/324-356

                   

C Type Rotary Cultivator with Ø450mm Packer Roller

Models

HP

Working Width m

Total Width m

Machine Centre 

No. of Blades

Working Depth cm

Weight kg

Side Drive

PTO/RPM

cm <--> cm

205

60-130

2.1

2.23

105<-->105

48

27

964

Gears

540/175-214-262-143

1000/324-356

230

70-130

2.35

2.48

117.5<-->117.5

54

27

1080

Gears

540/175-214-262-143

1000/324-356

250

80-130

2.6

2.73

130<-->130

60

27

1179

Gears

540/175-214-262-143

1000/324-356

280

85-130

2.85

2.98

142.5<-->142.5

66

27

1248

Gears

540/175-214-262-143

1000/324-356

300

100-130

3.1

3.23

155<-->155

72

27

1338

Gears

540/175-214-262-143

1000/324-356

Options & Accessories

C Type Rotary Cultivator 60-130hp

OPTIONAL EXTRAS

Model No.

Description

11M99500263

Disc unit RH

11M99500264

Disc unit LH

11M99500261

PR Front Depth Wheels

 

Central hudraulic roller adjuster

 

Counter Flanges 205-250

 

Counter Flanges 280 - 300

Pricing

Maschio Gaspardo January 2017 Price List

To download the MASCHIO GASPARDO product price list click the image above

To download and view our Product Price List you will need the free Adobe Reader
If you don't already have this Click Here to download the Adobe Reader

Downloads

Special Offers

Gallery

Would you like some more information?