G Type Rotary Cultivator 120-320hp

Introduction

G Type Rotary Cultivator 120-320hp

“G” Maschio Rotary Cultivators are designed for use on medium to large sized agricultural tractors from 120 to 320hp and are typically used for horticultural and agricultural work.

Main features:

  • CAT III/IV
  • Cam clutch protected 21 spline PTO
  • 1000 rpm Gearbox Gives 161, 178, 196, 216, 238, 263 rpm rotor speeds
  • Gearbox Oil Cooled With Radiator
  • Rear PTO
  • Side Gear Drive Immersed In Oil
  • 6 blades Per Flange
  • Bonnet Spring Adjusters
  • Skids or 500mm Packer Roller for Depth Control
  • Rear Levelling Bar With Mechanical Adjusters

Features

Gearbox

Front and rear multi-speed gearbox on both SC and G Type models. The SC Type is capable of running PTO speeds of 540/1000rpm, and the G Type comes as standard with an integrated gearbox fan, running at 1000rpm. (See PTO/RPM on the specification table below for rotor speeds).

PTO shaft

PTO shaft with cam clutch protection, 1” 3/8, 21 spline tractor side yoke.

PTO shaft with slip clutch protection on the SC model and cam clutch protection on the G type model, 21 spline tractor side yoke.

Side Gear Drive

Heavy duty gear drive running in a sealed oil bath to give constant lubrication during work.

Linkage mounting

Universal CAT II/III three point swinging hitches on the SC allow the machine to follow the contours on undulating ground,Universal CAT III/IV on the G Model.

CE Safety Guards

CE Safety guards as standard.

Anti-Rollover

The lower spring on the pressure rod that is connected to the rear levelling bonnet prevents the rotary cultivator from rolling over when the machine is being detached from the tractor when not using a rear roller.

Duo-Cone & O-Ring Sealing System

The new Duo-cone sealing system guarantees reliability without the need for maintenance. You can achieve at least 50% longer life from the Duo-cone system when compared to standard systems in the most demanding working environments.

The sealing system is completely waterproof or “amphibious” allowing the rotor and bearing to run in its own oil supply, this allows the rotor to work and be reliable in the dustiest of environments or even work immersed in water and yet the seals will still prevent water and dust ingress into the rotor and hubs. The rotor is supported by oversized SKF roller bearings.

Levelling Bonnet

The levelling bonnet comes as standard complete with a sprung mechanical rod that puts constant downward pressure on the bonnet and acts as a shock absorber protecting the bonnet from damage, whist working in stony conditions. (Double rear bonnet on G Type for a finer finish).

Blades

The SC & G Type Rotary Cultivators have 6 blades per flange ensuring a fine tilth is produced. 

Adjustable Side Skids

A protective skid on either side of the machine controls the working depth and protects the main transmission cover from wear.

Rear Roller Adjuster

Depth adjustment is controlled by two mechanical adjusters on SC Type, hydraulic depth control on G Type.

Rear Rollers

The ROTARY CULTIVATOR rollers adapt the machines for different types of soil and different requirements of seed bed preparation. One type is available on the G TYPE - packer roller.

Works well on medium soil types and in low moisture conditions creating a good seed bed.

Packer Roller - Ø500mm

The toothed Packer Roller works well breaking up any surface clods further and at the same leaving an excellent finish, ready for seeding. This roller also comes standard with tungsten coated scrapers.

Rear Roller Bearings

Strength is designed in to the build of each type of roller and the end bearings are protected by their casings whilst grease nipples are positioned out of harm's way.

 Tungsten Scrapers

Adjustable 'Long Life' Tungsten scrapers are fitted to all packer rollers and rubber rollers, they are positioned low, close to the soil at the rear of the roller ensuring soil does not build up into large clumps before being cleaned off.

Barrel Roller Bearings

The SC and G Type Rotary Cultivator utilises BEARING barrel roller bearings; each bearing has a double rail consisting of two rows of spherical or barrel bearings to cope with heavy workloads and ensure years of trouble-free use.

Models

G Type Rotary Cultivator 120-320hp

Models

G Type - Standard Equipment

 

 

 

275

 

300

 

350

 

420 DT

Gearbox with 1000 rpm PTO

Rotor revolution (rpm): 161-178-196-216-238-263

PTO shaft with slip clutch (1" 3/8 6 spline tractor side yoke)

Side gear drive in oil bath

Universal three point hitch cat. II

Swinging front hitches

Rear PTO

Bonnet spring adjusters 

Mechanical rear roller adjusters 

6 blades per flange with double flange 

(side blades are always mounted inwards)

Rear levelling bar with mechanical side adjusters

«CE» safety guards

Technical Information

G Type Rotary Cultivator 120-320hp

Models 

 HP

 Working width
(m)

 Total Width (m)

 No. of blades

 Working depth (cm)

Weight (kg) 

 Weight + Cage (kg)

 Weight + Packer (kg)

PTO/RPM 

 275

120-275

2.75

3.00

 66

29

1365

1635

1810

1000/161-178-196

1000/216-238-263

 300

150-270

3.1

3.25

72

29

1450

1735

1930

1000/161-178-196

1000/216-238-263

 350

170-270

3.6

3.75

84

29

1550

1870

2095

1000/161-178-196

1000/216-238-263

420 DT

200-320

4.25

4.30**

96

29

2050

2430

2685

1000/161-178-196

1000/216-238-263

Options & Accessories

G Type Rotary Cultivator 120-320hp

G Type Rotary Cultivator - OPTIONAL EXTRAS

Model No.

Description

11M99596036

Pair of Front Wheels

11M99500A40

Disc Unit RH

11M99500A41

Disc Unit LH

11M99524025

Pair of track eradicators - shearbolt

11M99524026

Pair of track eradicators - spring reset

Pricing

Maschio Gaspardo January 2017 Price List

To download the MASCHIO GASPARDO product price list click the image above

To download and view our Product Price List you will need the free Adobe Reader
If you don't already have this Click Here to download the Adobe Reader

Downloads

Special Offers

Gallery

Would you like some more information?