SC COBRA Rotary Cultivator 100-170hp

Introduction

SC COBRA Rotary Cultivator 100-170hp

“SC Cobra” Type Maschio Rotary Cultivators are designed for use on medium sized agricultural tractors from 100 to 170hp and are typically used for horticultural and agricultural work.   

Main features:

  • Cat II
  • 6 Spline PTO Shaft With Slip Clutch
  • 540 rpm Gearbox Gives 133, 162, 220 rpm rotor speeds
  • 1000 rpm Gearbox Gives 181, 264, 300 rpm rotor speeds
  • Side Drive Gears Immersed In Oil
  • 4 Blades Per Flange
  • Bonnet Spring Adjusters
  • 450mm Packer Roller for Depth Control
  • Rear Levelling Bar With Mechanical Adjusters

Features

Gearbox

Front and rear input multi speed PTO gearbox running at 540/1000 rpm, 3 speed settings at 540rpm PTO rpm giving a choice of 133, 162 & 220 rotor rpm, 3 speed settings at 1000 PTO rpm giving a choice of 181, 246 & 300 rotor rpm.

PTO shaft

PTO shaft with slip clutch protection, 1” 3/8, 6 spline tractor side yoke.

Side chain drive

Heavy duty gear drive running in a sealed oil bath to give constant lubrication during work.

Linkage mounting

Universal CAT II three point swinging hitches allow the machine to follow the contours on undulating ground.

 

CE safety guards

CE Safety guards as standard.

Anti roll over

The lower spring on the pressure rod that is connected to the rear levelling bonnet prevents the rotary cultivator from rolling over when the machine is being detaching from the tractor.

Duo-Cone & O-Ring sealing system

The new Duo-cone sealing system guarantees reliability without the need for maintenance.  You can achieve at least 50% longer life from the Duo-cone system when compared standard systems in the most demanding working environments.

The sealing system is completely waterproof or “amphibious” allowing the rotor and bearing to run in its own oil supply, this allows the rotor to work and be reliable in the most dustiest environments or even work immersed in water and yet the seals will still prevent water and dust ingress into the rotor and hubs.

The rotor is supported by oversized SKF roller bearings.

Levelling bonnet

The levelling bonnet comes as standard complete with a sprung mechanical rod that puts constant downward pressure on the bonnet and acts as a shock absorber protecting the bonnet from damage, whist working in stony conditions.

Blades

The SC COBRA Type Rotary Cultivator has 4 COBRA blades per flange ensuring a fine tilth is produced.

The COBRA blades are specially designed for very hard or uncultivated soil types.

 

Adjustable side skids

A protective skid on either side of the machine controls the working depth and protects the main transmission cover from wear.

Adjustable rear roller

Depth adjustment is controlled by two mechanical adjusters.

Rear rollers

The ROTARY CULITVATOR rollers adapt the machines for different types of soil and different requirements of seed bed preparation. One type is available on the SC COBRA TYPE - packer roller.

Works well on medium soil types and in low moisture conditions creating a good seed bed.

Packer Roller - Ø450mm

The toothed Packer Roller works well breaking up any surface clods further and at the same leaving an excellent finish, ready for seeding. This roller also comes standard with tungsten coated scrapers.

Rear Roller Bearings

Strength is designed in to the build of each type of roller and the end bearings are protected by their casings whilst grease nipples are positioned out of harm's way.

 

Tungsten Scrapers

Adjustable 'Long Life' Tungsten scrapers are fitted to all packer rollers and rubber rollers, they are positioned low, close to the soil at the rear of the roller ensuring soil does not build up into large clumps before being cleaned off.

Models

SC COBRA Rotary Cultivator 100-170hp

Models

SC COBRA Type - Standard Equipment

250

Gearbox with 540/1000 rpm PTO

540 PTO rotor revolution (rpm): 133-162-220

1000 PTO rotor revolution (rpm): 181-246-300

PTO shaft with slip clutch (1" 3/8 6 spline tractor side yoke)

Side gear drive in oil bath

Universal three point hitch cat. II

Swinging front hitches

Rear PTO

Cobra rotor 

Bonnet spring adjusters 

Mechanical rear roller adjusters 

4 blades per flange

Rear levelling bar with mechanical side adjusters

«CE» safety guards

280

300

Technical Information

SC COBRA Rotary Cultivator 100-170hp

SC COBRA Fixed Frame Rotary Cultivator with Ø450mm Packer Roller

   

Models

HP

Working Width m

Total Width m

Machine Centre 

No. of Blades

Working Depth cm

Weight kg

Side Drive

PTO/RPM

cm <--> cm

250

100-170

2.6

2.73

130<-->130

84-48

28

1360

Gears

540/133-162-220

1000/181-246-300

280

110-170

2.85

2.98

142.5<-->142.5

92-53

28

1460

Gears

540/133-162-220

1000/181-246-300

300

130-170

3.1

3.23

155<-->155

100-58

28

1562

Gears

540/133-162-220

1000/181-246-300

Options & Accessories

SC COBRA Rotary Cultivator 100-170hp

OPTIONAL EXTRAS

Model No.

Description

11M99500071

Counter flanges for 250-280

11M99500073

Counter flanges for 300

11M99500239

Hydraulic up and over drill hitch

11M99500260

Pair of wheel track eradicators

11M99500263

Disc unit RH

11M99500264

Disc unit LH

 

Central hydraulic roller adjuster

 

Condor blades also available for stony conditions

Pricing

Maschio Gaspardo January 2017 Price List

To download the MASCHIO GASPARDO product price list click the image above

To download and view our Product Price List you will need the free Adobe Reader
If you don't already have this Click Here to download the Adobe Reader

Downloads

Gallery

Would you like some more information?