BARBI Flail Mower 25-45hp

The Barbi Flail Mower is a light duty model, designed for use on compact tractors from 20 to 45hp and is typically used for amenity and gardening applications. 

The Barbi Flail Mower is suitable for cutting grass and shredding small branches and twigs.

It comes as standard with mechanical offset, multiple toothed transmission belts (3) and adjustable self cleaning rear roller.

The Barbi uses a self contained gearbox with an input speed of 540 rpm.

The Barbi Flail Mower uses category I three point linkage mounting to connect to the tractor. 

The Barbi Flail Mower utilises 3 toothed transmission drive belts to transfer power to the rotor, the toothed drive belts allow slip proof engagement preventing power from the transmission being reduced due to heavy loads or general wear.

The Barbi Flail Mower comes standard with hammer flails and as an option with fish tail flails, the self sharpening hammer flail leaves a clean and level cut and lifts and mulches while cutting, whereas the fish tail flail is used for cutting dense tougher material. The hammers and blades bolt onto an electronically balanced rotor that minimises machine vibration and stresses on the bearings.  

The Barbi Flail Mower has an internal lower counter blade that ensures that the discharged material is mulched into a fine pieces. Fish tail flails are optional.

The internal position unloads the material behind the roller and is recommended for grass cutting. As a rule the roller scraper isn't required for the internal position as the spinning flails on the machine automatically carry out this process. 

Steel front safety flaps allow material to enter the cutting chamber but prevent pieces from being thrown out at high speed.

The Barbi Flail Mower comes as standard with mechanical offset, it utilises a pin system to allow the 3 point linkage frame to slide along a front bar to select the offset in either a left or right direction.

Barbi Models: 1m 100 (20-45HP), 1.2m 120 (25-45HP), 1.4m 140 (30-45HP), 1.6m 160 (35-45HP), 1.8m 180 (40-45HP)

Standard Equipment: 

• Cat I
• Mechanical Offset
• 6 Spline PTO
• Single Speed 540 rpm Gearbox With Freewheel
• Transmission Belts With External Adjustment
• Hammer Flails
• Lower Counter Blade
• Steel Front Safety Flaps
• Height Adjustable Rear Roller