BELLA Flail Mower 30-80hp

The Bella Flail Mower is a medium duty model, designed for use on compact or agricultural tractors from 30 to 80hp and is typically used for amenity and light agricultural applications. 

The Bella Flail Mower is suitable for cutting grass and shredding branches and twigs. 

It can be used as a front or rear mounted machine and comes as standard with, mechanical offset, multiple toothed transmission belts (3 or 4 depending on model) and adjustable self cleaning rear roller.

The Bella uses a self contained gearbox with an input speed of 540rpm, the gearbox can be reversed by unbolting and turning it over, this allows the Bella to be used as a front or rear mounted flail mower.

The Bella Flail Mower uses category I three point hitches to connect to the tractor which can be easily removed and reversed or turned allowing the Bella to be either a front or rear mounted machine. A Category II upgrade kit is available as an optional extra.

The Bella Flail Mower utilises 3 toothed transmission drive belts (Bella 190 & 210 have 4 toothed drive belts) to transfer power to the rotor, the toothed drive belts allow slip proof engagement preventing power from the transmission being reduced due to heavy loads or general wear.

The Bella Flail Mower comes standard with hammer flails and as an option with fish tail flails, the self sharpening hammer flail leaves a clean and level cut and lifts and mulches while cutting, whereas the fish tail flail is used for cutting dense tougher material. The hammers and blades bolt onto an electronically balanced rotor that minimises machine vibration and stresses on the bearings. 

The Bella Flail Mower comes as standard with double counter blades, an internal lower toothed counter blade and one upper counter blade that ensure that the discharged material is mulched into fine pieces. The upper counter blade enables the Bella to produce a finer mulch of harder coarser materials.

Height adjustment is controlled by the external rear roller on the Bella Fail Mower. 

Steel front safety flaps allow material to enter the cutting chamber but prevent pieces from being thrown out at high speed.

The Bella Flail Mower comes as standard with mechanical offset, it utilises a pin system to allow the 3 point linkage frame to slide along a front bar to select the offset in either a left or right direction. 

The Bella Flail Mower uses barrel roller bearings, each bearing has a double rail consisting of two rows of spherical or barrel bearings to cope with heavy workloads. All bearings used in Maschio Flail Mowers are produced by SKF. 

Main Advantages:

Long Life (Up to 30% longer life than traditional taper roller bearings) 

High Load Capacity (shock resistance) 

Easy Maintenance (One of Maschio's main philosophies)

Bella Models: 1.35m 135 (30-80HP), 1.55m 155 (35-80HP), 1.7m 170 (40-80HP), 1.9m 190 (45-80HP), 2.1m 210 (50-80HP)

Standard Equipment: 

• Cat I (Cat II option)
• Mechanical Offset
• 6 Spline PTO
• Single Speed 540 rpm Gearbox With Freewheel
• Transmission Belts With External Adjustment
• Hammer Flails
• Toothed Lower Counter Blade
• Steel Front Safety Flaps
• Height Adjustable Rear Roller 
• Optional Front or Rear Mounted