We use cookies to make your experience of our website better. Some of the cookies we use are essential for parts of the site to operate and have already been set. Find out more about the cookies we use and how to block or delete cookies here. By continuing to browse this site, you are agreeing to our use of cookies.
BRAVA Flail Mower 30-80hp
The Brava Flail Mower is a medium duty model, designed for use on compact tractors from 30 to 80hp and is typically used for amenity and gardening applications.
The Brava Flail Mower is suitable for cutting grass and shredding branches and twigs.
It comes as standard with mechanical offset, multiple toothed transmission belts (3 or 4 depending on model) and adjustable self cleaning rear roller.
The Brava uses a self contained gearbox with an input speed of 540 rpm.
The Brave Flail Mower uses category I three point hitches to connect to the tractor.
The Brava Flail Mower utilises 3 toothed transmission drive belts (Brava 200, 230 & 250 models have 4 toothed drive belts) to transfer power to the rotor, the toothed drive belts allow slip proof engagement preventing power from the transmission being reduced due to heavy loads or general wear.
The Barva Flail Mower comes standard with hammer flails and as an option with fish tail flails, the self sharpening hammer flail leaves a clean and level cut and lifts and mulches while cutting, whereas the fish tail flail is used for cutting dense tougher material. The hammers and blades bolt onto an electronically balanced rotor that minimises machine vibration and stresses on the bearings.
The Brava Flail Mower comes as standard with an internal lower counter blade that ensures that the discharged material is mulched into fine pieces. The upper counter blade kits are available as an optional extra for a finer mulching of harder coarser materials.
The internal position unloads the material behind the roller and is recommended for grass cutting. As a rule the roller scraper isn't required for the internal position as the spinning flails on the machine automatically carry out this process.
Steel front safety flaps allow material to enter the cutting chamber but prevent pieces from being thrown out at high speed.
The Brava Flail Mower comes as standard with mechanical offset, it utilises a pin system to allow the 3 point linkage frame to slide along a front bar to select the offset in either a left or right direction.
Brava Models: 1.45m 140 (30-80HP), 1.6m 160 (35-80HP), 1.75m 180 (40-80HP), 1.95m 200 (45-80HP), 2.3m 230 (50-80HP), 2.5m 250 (55-80HP)
Standard Equiment:
- Cat I
- Mechanical Offset
- 6 Spline PTO
- Single Speed 540 rpm Gearbox With Freewheel
- Transmission Belts With External Adjustment
- Hammer Flails
- Lower Counter Blade
- Steel Front Safety Flaps
- Height Adjustable Rear Roller
Models |
HP |
Working Width m |
Total Width m |
Machine Offset |
No. of Hammers |
Weight kg |
PTO/RPM |
cm <--> cm |
|||||||
140 |
30-80 |
1.45 |
1.54 |
70<-->65 |
14 |
435 |
540 |
44<-->96 |
|||||||
160 |
35-80 |
1.6 |
1.74 |
84<-->76 |
16 |
467 |
540 |
44<-->116 |
|||||||
180 |
40-80 |
1.75 |
1.89 |
84<-->91 |
20 |
490 |
540 |
44<-->131 |
|||||||
200 |
45-80 |
1.95 |
2.09 |
97.5<-->97.5 |
22 |
528 |
540 |
57.5<-->137.5 |
|||||||
230 |
50-80 |
2.30 |
2.45 |
123<-->107 |
26 |
620 |
540 |
83<-->147 |
|||||||
250 |
55-80 |
2.50 |
270 |
137<-->120 |
28 |
650 |
540 |
97<-->160 |
Brava Medium Duty Flail Mower - OPTIONAL EXTRAS |
||||||
Model No. |
Description |
|||||
11M99600021 |
Pair of skids |
|||||
11M99600120 |
Hydraulic offset |
|||||
11M99614503 |
Upper counter-blade BRAVA 140 |
|||||
11M99616503 |
Upper counter-blade BRAVA 160 |
|||||
11M99618503 |
Upper counter-blade BRAVA 180 |
|||||
11M99620503 |
Upper counter-blade BRAVA 200 |
|||||
11M99600010 |
Cat I to Cat II conversion |