GIRAFFA XL- Medium Duty Offset Flail Mower 50-110hp

Introduction

GIRAFFA XL- Medium Duty Offset Flail Mower 50-110hp

The Giraffa XL Flail Mower, previously known as the Giraffa, is one of the offset models, designed for use on small to medium sized agricultural tractors from 50 to 110hp and is typically used for amenity and agricultural applications.

The Giraffa XL Flail Mower is suitable for cutting grass, road side mowing clearance and shredding branches or twigs.

Main Features

  • Cat II/III
  • Hydraulic Horizontal offset and tilt
  • 6 Spline PTO
  • Single Speed 540 rpm Gearbox With Freewheel
  • Transmission Belts With External Adjustment
  • Hammer Flails
  • Toothed Lower Counter Blade
  • Steel Front Safety Flaps
  • Height Adjustable Rear Roller
  • Pair Of Side Skids
  • Break Back Protection
  • Left & Right hand offset models

Features

Shock Protection

The Obstruction Safety Brake Back Device on the Giraffa XL Offset Flail Mower protects the machine from damage when hitting immoveable objects during work, by allowing the Flail Mower to retract and move around the obstacle then return back to its set working position. 

PTO Gearbox

The Giraffa XL and Giraffa XXL Flail Mowers use a self contained 540 rpm over-run gearbox. There are two versions of each Giraffa model size, one with an internally mounted gearbox (SI) and one with an externally mounted gearbox (SE) which gives it an extra 44cm reach compared to the internal models.

  

 

 

Linkage Mounting

The Giraffa XL uses a category II or III three point hitches to connect to the tractor depending on the size of the model.

 

Transmission Belt

The Giraffa XL Flail Mower utilises 4 toothed transmission drive belts to transfer power to the rotor, the toothed drive belts allow slip proof engagement preventing power from the transmission being reduced due to heavy loads or general wear.

  

 

Blades & Hammer Kits

The Giraffa XL Flail Mower comes standard with hammer flails and as an option with fish tail flails, the self sharpening hammer flail leaves a clean and level cut and lifts and mulches while cutting. The fish tail flail is used for cutting dense tougher material. The hammers and blades bolt onto the rotor which is electronically balanced to minimise machine vibration and stresses on the bearings.  

Fish Tail FlailHammer Tail Flail

Counter Blade

The Giraffa XL Flail Mower comes as standard with an internal lower toothed counter blade that ensures that the discharged material is mulched into fine pieces. The upper counter blade kits are available as an optional extra for a finer mulching of harder coarser materials.

Adjustable Rear Roller

The Giraffa XL Flail Mower has one rear roller position. The internal position unloads the material behind the roller and is recommended for grass cutting. As a rule the roller scraper isn’t required for the internal position as the spinning flails on the machine automatically carry out this process.

Protective Front Safety Flaps

Steel front safety flaps allow material to enter the cutting chamber but prevent pieces from being thrown out at high speed.

  

Hydraulic Offset

The Giraffa XL Flail Mower comes as standard with hydraulically adjusted side and incline offset. It utilises a hydraulic system to allow the machine to work either directly behind the tractor or to the side enabling the user to reach far beyond the profile of the tractor and the ability to work on vertical or steep sloping surfaces. Comes in both left or right hand models.

Pair of Side Skids

A pair of hard wearing protective skids prevent wear to the machine and allow the operator to adjust the cutting length.

Floating Head System

The flail head on the Giraffa XL is fully floating allowing it to follow the contours of the ground.

  

Long Life Bearings

The Giraffa XL Flail Mower uses barrel roller bearings, each bearing has a double rail consisting of two rows of spherical or barrel bearings to cope with heavy workloads. All bearings used in Maschio Flail Mowers are produced by SKF.

Main Advantages:

Long Life (Up to 30% longer life than traditional taper roller bearings) 

High Load Capacity (Shock resistance) 

Easy Maintenance (One of Maschio's main philosophies)

Model

Model

Models

Giraffa XL - Medium Duty Offset - Standard Equipment

160 SI

Self cleaning adjustable rear roller

Double three point hitch Cat. II-III

Gearbox PTO 540 rpm with PTO and free-wheel

Transmission belts with external adjustment 

Front safety flaps

Hydraulic system for side or inclined offset

Lower toothed counter-blade

Pair of skids 

Electronically balanced rotor

Hammer kit “14”

Bracket for drive cover protection

Shockproof protection system

«CE» safety guards

Left or Right hand models

185 SI

210 SI

160 SE

185 SE

210 SE

Technical Information

Technical Information

Models

Cutting Side

HP

Working Width m

Total Width m

No. of Hammers

Weight kg

PTO/RPM

160 SI

Left

50-110

1.57

1.77

16

716

540

185 SI

Left

60-110

1.9

2.1

20

776

540

210 SI

Left

70-110

2.12

2.32

22

792

540

160 SE

Left

50-110

1.57

1.98

16

716

540

185 SE

Left

60-110

1.9

2.31

20

776

540

210 SE

Left

70-110

2.12

2.53

22

792

540

160 SI

Right

50-110

1.57

1.77

16

716

540

185 SI

Right

60-110

1.9

2.1

20

776

540

210 SI

Right

70-110

2.12

2.32

22

792

540

160 SE

Right

50-110

1.57

1.98

16

716

540

185 SE

Right

60-110

1.9

2.31

20

776

540

210 SE

Right

70-110

2.12

2.53

22

792

540

Models

A

C

D

cm

cm

cm

cm

cm

160 SI

157

170

80

221

122

185 SI

190

170

80

251

155

210 SI

212

170

80

276

177

160 SE

157

170

35

265

150

185 SE

190

170

35

295

183

210 SE

212

170

35

320

205

Options & Accessories

Options & Accessories

Giraffa XL Medium Duty Offset Flail Mower - OPTIONAL EXTRAS

Model No.

Description

11M99616985

Double Skin GIRAFFA XL 160

11M99618985

Double Skin GIRAFFA XL 185

11M99621985

Double Skin GIRAFFA XL 210

11M99600086

Hydraulic dervice reduction kit (from 4 to 2)

11M99600538

Set of wear-reistant skids

11M99615739

Upper counter blade GIRAFFA XL 160 (bolt in)

11M99619739

Upper counter blade GIRAFFA XL 185 (bolt in)

11M99621739

Upper counter blade GIRAFFA XL 210 (bolt in)

 

Price surcharge for costant speed PTO shaft

 

Price surcharge for multiaggressive rotor

Downloads

Gallery

Would you like some more information?