TIGRE Flail Mower 55-140hp

The Tigre Flail Mower is a heavy duty model, designed for use on small to medium sized agricultural tractors from 55 to 140hp and is typically used for amenity and agricultural applications.

The Tigre Flail Mower is suitable for cutting grass, crop residues, cornstalks and shredding branches or twigs.
It comes as standard with, hydraulic offset, multiple toothed transmission belts (5) and height adjustable rear roller.

Main Features

• Cat II
• Hydraulic Offset
• 6 Spline PTO
• Single Speed 540 rpm Gearbox With Freewheel
• 5 Transmission Belts With External Adjustment
• Hammer Flails
• Double Toothed Lower Counter Blade
• Steel Front Safety Flaps
• Height Adjustable Rear Roller
• Double Skin Frame

The Tigre uses a self contained gearbox with an input speed of 540 rpm.

The Tigre Flail Mower uses category II three point hitches to connect to the tractor.

The Tigre Flail Mower utilises 5 toothed transmission drive belts to transfer power to the rotor, the toothed drive belts allow slip proof engagement preventing power from the transmission being reduced due to heavy loads or general wear.

The Tigre Flail Mower comes standard with hammer flails and as an option with fish tail flails, the self sharpening hammer flail leaves a clean and level cut and lifts and mulches while cutting, whereas the fish tail flail is used for cutting dense tougher material. The hammers and blades bolt onto an electronically balanced rotor that minimises machine vibration and stresses on the bearings.

The Tigre Flail Mower comes as standard with double counter blades, an internal lower toothed counter blade and one upper counter blade that ensure that the discharged material is mulched into fine pieces. The upper counter blade enables the Tigre to produce a finer mulch of harder coarser materials.

The internal position unloads the material behind the roller and is recommended for grass cutting. As a rule the roller scraper isn't required for the internal position as the spinning flails on the machine automatically carry out this process.

Steel front safety flaps allow material to enter the cutting chamber but prevent pieces from being thrown out at high speed.

The Tigre Flail Mower comes as standard with hydraulically adjusted offset. It utilises a hydraulic system to allow the 3 point linkage frame to slide along a front bar to selecting the offset in either a left or right direction.

The double skin frame re-enforces the main structure of the machine and also protects the external skin from wear and damage from debris inside the flail mower during work.

The Tigre Flail Mower uses barrel roller bearings, each bearing has a double rail consisting of two rows of spherical or barrel bearings to cope with heavy workloads. All bearings used in Maschio Flail Mowers are produced by SKF.

Main Advantages:

Long Life (Up to 30% longer life than traditional taper roller bearings) 

High Load Capacity (Shock resistance) 

Easy Maintenance (One of Maschio's main philosophies)