We use cookies to make your experience of our website better. Some of the cookies we use are essential for parts of the site to operate and have already been set. Find out more about the cookies we use and how to block or delete cookies here. By continuing to browse this site, you are agreeing to our use of cookies.
GABBIANO Power Harrow 120-260hp
The GABBIANO Power Harrow is recommended for medium to large farms, offering 4m and 5m models.
It’s robust, but light enough to use with tractors ranging from 120 hp to 260 hp. The GABBIANO is hydraulic folding version of the DRAGO DC but comes with some additional features.
The GABBIANO Rapido Plus Power Harrow comes with a multi-speed 540/1000 rpm gearbox with interchangeable sets of gears.
The GABBIANO comes as standard with cam clutch central PTO shaft (1" 3/8 21 spline tractor side) with two (LONG LIFE) side PTO shafts.
Cat II three point swinging hitches allow the machine to be connected to the tractor with ease and prevent heavy stresses being applied to the power harrow and tractor when working on undulating ground as the swinging hitches allow the machine to float whist still being securely attached to the tractor.
The GABBIANO utilises a simple pin system to control the depth as standard. Hydraulic depth control is available as an option.
25cm spacing between the rotors give Maschio Power Harrows more rotors than many other power harrows on the market today, it also lowers the horsepower requirement and most importantly leaves a finer tilth.
The tine rotors are all positioned at different angles which allow the power harrow to gradually dig into the soil reducing the vibration transmitted to the tractor and reducing peak loads on the driveline resulting in smoother operation and less fuel consumption.
The image above shows the strength that is built into the Maschio power harrow transmission trough. It has been put through rigorous testing with extreme loads to ensure it’s one of the strongest on the market.
The GABBIANO RAPIDO PLUS Power Harrow comes with the double skin transmission trough consisting of an inner 6mm steel trough and a 5mm outer skin, resulting in 11mm thickness in total.
The outer skin prevents stones and other objects damaging the inner skin and also gives a huge amount of strength to the main trough which needs to cope with the power that is transmitted through the drive line and all the stresses and vibrations during work.
The extra long side guards prevent soil spilling from the side of the power harrow and leaving ridges and lines during work. The guards have built in spring dampeners that absorb the collisions from large stones preventing damage.
Quick Plus is a bolt on shield system which fits just in-front of the rotor as it comes out of the transmission trough, preventing stones and debris colliding with the rotor and gearbox, in turn this helps to push the stones down to the lower cultivated area.
Folding power harrows come with road transport lights and safety reflectors as standard.
The Lock/Unlock is automatic allowing the operator to be in the cab safely away from the power harrow during folding and unfolding.
The floating device guarantees a constant working depth on undulating ground and giving the Gabbiano Rapido Plus Power Harrow 3% upward movement on each wing. The floating function can be deactivated by simply moving the locking pin from position A to position B.
The Gabbiano Rapido Plus Power Harrow folds to 2.22m for safe road transport.
The POWER HARROW rollers adapt the machines for different types of soil and different requirements of seed bed preparation. Three types are available on the GABBIANO Rapido Plus - cage roller, packer roller and guttler roller.
Cage Roller - Ø450mm
Works well on medium soil types and in low moisture conditions creating a good seed bed.
Packer Roller - Ø500mm
The toothed Packer Roller works well breaking up any surface clods further and at the same leaving an excellent finish, ready for seeding. This roller also comes standard with tungsten coated scrapers.
Guttler Roller - Ø450mm
The acrylic/special cast Guttler roller is the ideal solution for reducing weight and yet still aggressively cultivating the soil. It also concentrates consolidation in line with drill coulters and stays clean in tacky conditions.
Rear Roller Bearings
Strength is designed in to the build of each type of roller and the end bearings are protected by their casings whilst grease nipples are positioned out of harm's way.
Levelling Bar
The levelling bars on all models are mounted on the rear roller, this ensures that the levelling bar does not have to be altered every time the power harrow is adjusted for depth. The adjustment of the levelling bar allows the operator to ensure an even 'bed' of soil is presented to the rear roller for consolidation giving a consistent finish behind the power harrow. The levelling bar can also be used to keep soil, particularly clods, in the rotor area so that it is broken down to a finer particle size before passing underneath the bar and roller.
Tungsten Scrapers
Adjustable 'Long Life' Tungsten scrapers are fitted to all packer rollers and rubber rollers, they are positioned low, close to the soil at the rear of the roller ensuring soil does not build up into large clumps before being cleaned off.
All Maschio tines are produced in Italy by Maschio and are made from high quality Boron tempered steel to provide reliability during work and long lasting performance. They are made on a robotic production line to guarantee that from the first to the last they are all of the finest quality.
The rotor splines are pressed into the shaft not machined, resulting in much stronger teeth and a more robust rotor shaft capable of transmitting higher torque.
The rotor shaft is made from the highest quality carbon steel.
The 50mm rotor shaft gives added strength to the drive-line ensuring years of trouble free operation.
Maschio Power Harrows feature ‘heavy duty’ Labyrinth seals that prevent water and soil penetrating the rotor and gearbox, this also prevent oil escaping even after many seasons of use.
The Labyrinth seal guarantee a perfect seal allowing both bearings to be maintenance-free.
The Maschio rotor system has a long shaft and reinforced bearings that are spaced as far apart as possible to cope with the twisting force and torque applied to the rotor.
Hardened gears submerged in oil transfer the power from the drive-line to the rotor tines.
Each rotor has a separate cover which allows the bearings to be checked or changed without the need of completely removing the whole transmission trough cover.
Gabbiano Rapido Models: 4m 4000 (120-260HP), 5m 5000 (140-260HP)
Standard Equipment:
- Cat II
- 21 Spline PTO Shaft With Cam Clutch
- Long Life Side PTO Shafts
- Gearbox Speed 1000 rpm Giving 357 rpm Rotor Speed
- Rapido Quick Fit Tines
- Stone Deflectors
- Central Ridge Eradicator
- Pin Adjustment For Rear Roller
- Long Dampened Side Deflectors
- Rear Levelling Bar With Mechanical Adjustment
- Wing Floating Facility (Upwards)
- Hydraulic Transport Locks
- Rear Lights c/w marker boards
Gabbiano Rapido Plus Power Harrow with Ø450mm Cage Roller |
||||||||||
Models |
HP |
Working Width |
Total Width m |
Transport |
Machine Centre |
No. of Tines |
Working Depth cm |
Weight kg |
Shaft Diameter mm |
PTO/RPM |
m |
Width (Folded) m |
cm <--> cm |
||||||||
4000 |
120-260 |
4 |
4.06 |
2.22 |
200<-->200 |
32 |
28 |
2090 |
50 |
1000 / 357 |
5000 |
140-260 |
5 |
5.06 |
2.22 |
250<-->250 |
40 |
28 |
2350 |
50 |
1000 / 357 |
Gabbiano Rapido Plus Power Harrow with Ø500mm Packer Roller |
||||||||||
Models |
HP |
Working Width |
Total Width m |
Transport |
Machine Centre |
No. of Tines |
Working Depth cm |
Weight kg |
Shaft Diameter mm |
PTO/RPM |
m |
Width (Folded) m |
cm <--> cm |
||||||||
4000 |
120-260 |
4 |
4.06 |
2.22 |
200<-->200 |
32 |
28 |
2240 |
50 |
1000 / 357 |
5000 |
140-260 |
5 |
5.06 |
2.22 |
250<-->250 |
40 |
28 |
2540 |
50 |
1000 / 357 |
Gabbiano Rapido Plus Power Harrow with Ø450mm Guttler Roller |
||||||||||
Models |
HP |
Working Width |
Total Width m |
Transport |
Machine Centre |
No. of Tines |
Working Depth cm |
Weight kg |
Shaft Diameter mm |
PTO/RPM |
m |
Width (Folded) m |
cm <--> cm |
||||||||
4000 |
120-260 |
4 |
4.06 |
2.22 |
200<-->200 |
32 |
28 |
2424 |
50 |
1000 / 357 |
5000 |
140-260 |
5 |
5.06 |
2.22 |
250<-->250 |
40 |
28 |
2636 |
50 |
1000 / 357 |
Gabbiano Rapido Plus Power Harrow with No Rear Roller |
||||||||||
Models |
HP |
Working Width |
Total Width m |
Transport |
Machine Centre |
No. of Tines |
Working Depth cm |
Weight kg |
Shaft Diameter mm |
PTO/RPM |
m |
Width (Folded) m |
cm <--> cm |
||||||||
4000 |
120-260 |
4 |
4.06 |
2.22 |
200<-->200 |
32 |
28 |
2086 |
50 |
1000 / 357 |
5000 |
140-260 |
5 |
5.06 |
2.22 |
250<-->250 |
40 |
28 |
2286 |
50 |
1000 / 357 |
Gabbiano Rapido Plus Power Harrow - OPTIONAL EXTRAS |
|
Model No. |
Description |
11M99524025 |
Pair of track eradicators with pin adjustment and safety shear bolt |
11M99524026 |
Pair of track eradicators with pin adjustment and safety spring reset |
11M99500591 |
Cat.III quick coupling |
11M99500843 |
Hydraulic roller adjustment |
Rapido tine option 4m (factory fit) |
|
Rapido tine option 5m (factory fit) |