PANTERA Rotary Cultivator 200-380hp

“Panterra” Type Maschio Rotary Cultivators are designed for use on medium sized agricultural tractors from 200 to 380hp and are typically used for horticultural and agricultural work.

Models 420-620 have a single speed PTO gearbox running at 1000 rpm giving a rotor rpm of 258 with oil cooler. 

Direct PTO shaft with side PTO shafts complete with cam clutch protection, 1” 3/8, 20 spline tractor side yoke.

Heavy duty gear drive running in a sealed oil bath to give constant lubrication during work.

The Pantera comes as standard with CAT III three point hitches, they can either be set to work as swinging to allow the machine to follow the contours on undulating ground or rigid by using the locking pin.

CE Safety guards as standard.

The new Duo-cone sealing system guarantees reliability without the need for maintenance.  You can achieve at least 50% longer life from the Duo-cone system when compared standard systems in the most demanding working environments.

The sealing system is completely waterproof or “amphibious” allowing the rotor and bearing to run in its own oil supply, this allows the rotor to work and be reliable in the most dustiest environments or even work immersed in water and yet the seals will still prevent water and dust ingress into the rotor and hubs.

The rotor is supported by oversized SKF roller bearings.

The levelling bonnet comes as standard complete with a sprung mechanical rod that puts constant downward pressure on the bonnet and acts as a shock absorber protecting the bonnet from damage, whist working in stony conditions.

The Pantera Rotary Cultivator has 6 blades per flange ensuring a fine tilth is produced.

A protective skid on either side of the machine controls the working depth and protects the main transmission cover from wear.

The Pantera Rotary Cultivator comes as standard with hydraulic depth adjustment on the rear roller.

Rear lights as standard for safe road transport.

The ROTARY CULITVATOR rollers adapt the machines for different types of soil and different requirements of seed bed preparation. Two types are available on the PANTERA - cage roller and packer roller.

Cage Roller - Ø450mm

Works well on medium soil types and in low moisture conditions creating a good seed bed.

Packer Roller - Ø500mm & Ø600mm

The toothed Packer Roller works well breaking up any surface clods further and at the same leaving an excellent finish, ready for seeding. This roller also comes standard with tungsten coated scrapers.

Rear Roller Bearings

Strength is designed in to the build of each type of roller and the end bearings are protected by their casings whilst grease nipples are positioned out of harm's way.

Tungsten Scrapers

Adjustable 'Long Life' Tungsten scrapers are fitted to all packer rollers and rubber rollers, they are positioned low, close to the soil at the rear of the roller ensuring soil does not build up into large clumps before being cleaned off.

The ROTARY CULTIVATOR wheels adapt the machines for different types of soil and different requirements of seed bed preparation.

Pantera Models: 4.28m 420 (200-380HP), 4.78 470 (220-380HP), 5.28 520 (240-380HP), 5.78 570 (260-380HP), 6.28m 620 (280-380HP)

Standard Equipment:

• Cat III
• 20 Spline PTO Shaft With Cam Clutch
• 1000 rpm Gearbox Gives 258 rpm rotor speeds 
• Gearbox Oil Cooled With Radiator
• Side Gear Drive Immersed In Oil
• 6 Blades Per Flange
• Central Ridge Eradicator
• Bonnet Spring Adjusters
• Hydraulically Adjusted Cage Roller or Packer Roller for Depth Control
• Rear Levelling Bar With Mechanical Adjusters
• Optional depth wheels
• Lights complete with marker boards